FUSE VINYLPRO CERAMIC COATING
- Creates a 9H Ceramic Layer
- Can resist temperatures from -40c - +250c
- Works on Matte , Gloss & Textured Vinyls
- Dirt, grime and other contaminants are removed easily
- Lasts 2 years on a single coating.
- Available Now
Why use Fuse VINYLPRO?
FUSE VinylPRO is a high density ceramic coating that is resistant to chemicals ranging from pH2 - pH12. This characteristic also makes bonded contaminants such as tree sap, tar, and hard water spots, easy to remove. FUSE VinylPRO chemically bonds to the surface to create a 9H ceramic layer.
Unlike mainstream wax and polymer coatings, FUSE VinylPRO can resist much higher and lower temperatures. They resist temperatures as low as -40o to as high as +250o C.
How do I use it? Does it last long?
Simply apply 6-7 drops to an application pad, coat the surface (2ft x 2ft sections are advised) and wipe off clean when product starts to flash or evaporate (within 20 seconds).
Make sure all excess is wiped off. It is best to work in a well lit environment. Product should start to work after a couple hours. FUSE VinylPRO will typically last 2 years.